FOR SALE!
Raglan Mk1 LittleJohn 5" Desktop Screwcutting Lathe + Tools, E Mids
Read about this type of lathe at http://www.lathes.co.uk/raglan/page12.html
It is with a heavy heart I have to sell my Raglan Littlejohn.
I got this lathe for motorbiking - it is one of the few lathes desktop with 5" to the bed, and accepts over 20" between centres. It accepts over 1" through teh headstock, has MT4 on the headstock and MT2 on the tail. It has 1/2hp single phase 1425rpm motor with new forward/reverse switch, new V belt, and a reprint of the owners manual. It has good backgears and good brass idler gears.
You relatively easily mount an RGV cylinder head for compression work, and is ideal for all kinds of spacers and light general machining.
The lathe has variable speed variator control, is back-geared for slow speed work and has screwcutting ability via change wheels, supplied. It is supplied with the following:-
All supplied in a big 2ft square metal box
I had this for over a year, was gradually rebuilding it, but need the cash as the rent is due - you can read my Blog at http://raglanlittlejohn.blogspot.com/
Lathe comes with a wobbly stand and big metal box full of stuff. Collection only as it is heavy, but two pepople can carry OK. I collected it in a Corsa 1.2 with the rear seats removed and a 1/2" ply board in the back, so it easy fits in an estate car.
£525 ono - If I get no response then it will be on Ebay in July.
Here is a similar one (NOT MINE)on EBay including original stand
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190125016979
Read about this type of lathe at http://www.lathes.co.uk/raglan/page12.html
It is with a heavy heart I have to sell my Raglan Littlejohn.
I got this lathe for motorbiking - it is one of the few lathes desktop with 5" to the bed, and accepts over 20" between centres. It accepts over 1" through teh headstock, has MT4 on the headstock and MT2 on the tail. It has 1/2hp single phase 1425rpm motor with new forward/reverse switch, new V belt, and a reprint of the owners manual. It has good backgears and good brass idler gears.
You relatively easily mount an RGV cylinder head for compression work, and is ideal for all kinds of spacers and light general machining.
The lathe has variable speed variator control, is back-geared for slow speed work and has screwcutting ability via change wheels, supplied. It is supplied with the following:-
- Raglan Lathe Handboock Reprint
- 4 tool post holder
- Raglan Headstock Nose Protector
- Raglan 9" Face Plate
- Raglan Catch Plate
- Pratt ES748 8" Four Jaw independent chuck (no backplate)
- Bernerd 6" 3 Jaw self centreing chuck with backplate
- CVA 5" 3 Jaw self centreing chuck with backplate
- Chinese MT2 1/2" Drill Chuck (new)
- Jacobs MT1 1/2" Drill Chuck
- MT4 Dead Centre (new)
- MT2 Dead Centre
- Chinese 3" V Blocks Pair (new)
- Chinese 3" Angle Plate (new)
- Set MT Sleeves: 5-4, 4-3, 3-2, 2-1
- 3 point fixed steady (need base pate spacer making)
- 5off Various dog drives
- Half completed grinding attachment
- Eheim 280W Single 240V Grinding motor
- Angle Adaptor
- Approx 15 assorted lathe tools (1 carbide)
- 5 piece centre drill set (new)
- Changewheels
- 30T
- 32T
- 2off 42T
- 44T
- 45T
- 3off 48T
- 60T
- Pack of shim stock
- Washing machine pump (not shown, intended for suds)
All supplied in a big 2ft square metal box
I had this for over a year, was gradually rebuilding it, but need the cash as the rent is due - you can read my Blog at http://raglanlittlejohn.blogspot.com/
Lathe comes with a wobbly stand and big metal box full of stuff. Collection only as it is heavy, but two pepople can carry OK. I collected it in a Corsa 1.2 with the rear seats removed and a 1/2" ply board in the back, so it easy fits in an estate car.
| Ebay Header Shot | Action Shot | Gear Train |
 |  |  |
| Change Wheels | Supplied Kit | |
 |  |
£525 ono - If I get no response then it will be on Ebay in July.
Here is a similar one (NOT MINE)on EBay including original stand
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190125016979
posted by Vincent at 20:30
0 comments
